Contract Provisions

  • The provisions at the links below are incorporated into any agreement or 3M purchase order to the extent the agreement or purchase order references one or more of these provisions. If there is more than one version of a provision, the version in effect on the effective date of the agreement or the date the purchase order was issued will apply until the agreement is amended or a subsequent purchase order is issued, in which case the version in effect on the date of the amendment or subsequent purchase order will apply.


  • Background
    3M is a worldwide leader in innovation and quality. To deliver best value, cutting edge products, 3M maintains a dynamic, worldwide supply chain. As with any global supply chain, there is risk that counterfeit materials, parts, components and assemblies may be introduced. The presence of counterfeit material could adversely impact 3M’s ability to meet customer expectations and expose 3M to penalties, fines, damages and other serious adverse consequences. Accordingly, 3M has established a Counterfeit Material Control Plan to ensure compliance with customer anti-counterfeit requirements, the evolving laws in this area and to ensure the overall quality, compliance and reputation of 3M’s diverse, innovative product lines.

    3M Expectations of Suppliers
    As part of 3M’s Counterfeit Material Control Plan, 3M has implemented a minimum set of risk-based counterfeit mitigation measures for all product lines, including measures relating to products and materials provided to 3M by suppliers. These measures are reflected in the Counterfeit Goods Provisions referenced below and are in addition to any other counterfeit goods requirements specified in a written agreement with 3M or provided to a supplier by 3M.

    Counterfeit Goods Provisions
    The following provisions apply to any purchase order for goods issued by 3M Company or its affiliates and to products provided to 3M or its affiliates pursuant to a written agreement:

    PDF Document Counterfeit Goods (146 KB)

  • Background
    3M Company and several of its affiliates participate in U.S. Government contracts and must certify as to compliance with the statute and regulations.

    Section 889(a)(1)(B) of the 2019 National Defense Authorization Act (NDAA) for FY 2019 (Pub. L. No. 115-232) prohibits U.S. Government executive agencies from entering into, or extending or renewing, a contract with an entity that uses any equipment, system, or service that uses Covered Telecommunications Equipment or Services as a substantial or essential component of any system, or as Critical Technology as part of any system, on or after August 13, 2020, unless an exception applies or a waiver is granted. Federal Acquisition Regulations (FAR) implementing the statute have been issued; see Federal Acquisition Regulations FAR 52.204 through 52.204-26 for more information including meaning of “Covered Telecommunications Equipment or Services” and “Critical Technology”.

    3M Expectations of Suppliers
    3M has implemented a compliance program to ensure that it complies with applicable laws and regulations. 3M maintains a dynamic, worldwide supply chain and relies upon active participation by its suppliers in ensuring such compliance.

    Restricted Products Provisions
    The following provisions apply to any purchase order for goods or services issued by 3M Company or its affiliates and to any products or services provided to 3M or its affiliates pursuant to a written agreement:

    You warrant that
    No Covered Telecommunications Equipment or Services Warranty (PDF, 403 KB)

  • PDF Document Effective 01-21-16 (179K)

  • Why Forests and Responsible Supply Chains are Important

    Forests are used by people around the world for recreation, cultural significance, health and livelihood. They are home to many species of plants and animals, their trees capture and store atmospheric carbon, and they support vital services like clean water. These complex ecosystems are valuable resources that should be responsibly managed and preserved for future generations. 3M does not support natural forest degradation or conversion to non-forest use. We support the protection of indigenous peoples’ rights to offer Free and Prior Informed Consent (FPIC) to harvesting operations on their land, and of workers’ safety and other basic rights.

    At 3M, we are guided by our values; they are woven into the very fabric of our company culture. We act with uncompromising integrity. We respect our social and physical environments around the world. We share our sustainability values with our customers and stakeholders. 3M wants to work with the best suppliers who share these commitments to sustainable forests and responsibility in all stages of the forest products supply chain.

    The 3M Forest Products Sourcing Policy

    The PDF Document 3M Forest Products Sourcing Policy (149 KB) formalizes our and our supply chain’s responsibilities to comply with global regulations, and further the causes of sustainable forestry and transparent, responsible supply chains.

    We expect our forest products suppliers to read, understand and implement the expectations in our Policy. The companion PDF Document 3M Forest Products Sourcing Policy Conformance Guidance Document (200 KB) contains definitions and additional explanation of many of the important concepts in the Policy. 3M will also provide our suppliers additional information and opportunities for education and engagement.


    Chinese

    French

    Japanese

    Korean

    Portuguese

    Spanish

    Please refer to 3M's web page on Sustainable Forestry for more information, including links to our Policy Progress Reports.

    3M’s Expectations for Suppliers

    Legality: 3M expects that all forest based products and materials supplied to us contains wood or plant-based fiber that is legally harvested, sourced, transported and exported from its country of origin. Please see the Legal Harvesting Laws on this page for more information on these expectations.

    Traceable to Forest Source: 3M expects suppliers to know their own supply chains, and respond to our requests for material traceability information in a complete and timely manner. Understanding our forest products supply chain, including but not limited to paper and pulp mills and forest sources, is fundamental to ensuring Policy conformance. We depend on our direct suppliers to understand and disclose their supply chains to us, so that together we can ensure Policy conformance and drive responsible sourcing and sustainable forestry.

    Due Diligence Management System: 3M expects our suppliers to adopt company policies and a due diligence management system approach to address responsible forest products sourcing and sustainable forestry. We also expect our suppliers to work with their suppliers to adopt similar policies and management systems. 3M has created a Word Document due diligence management system template outline (60 KB) for our suppliers' use if they choose, and which can be shared with their suppliers.

    Certification: 3M expects our suppliers to know the forest certification status of the material they purchase and of the entities in their supply chain, and to disclose certification information to us upon request. 3M’s policy expectations and guidelines are consistent with many forest certification standards, but our Policy does not require certification. Certification in and of itself is not the objective of our Policy, but it is one useful tool to help verify what is happening on the ground. Please refer to this PDF Document forestry certification overview (513 KB) for more on how we believe our Policy compares to the major global forestry certification schemes.

    Collaboration: 3M expects our suppliers to work together with us and their suppliers to ensure Policy conformance and promote responsible and transparent supply chains. We recognize the integral role that our suppliers play to source and produce the materials required for 3M products, and we know that collaboration and transparency depend on a foundation of mutual trust. Through our Forest Products Sourcing Policy, we wish to harness the power of our supply chain to achieve real, positive change for the world's forests.

    Conformance: 3M expects our suppliers to be forthcoming in their opportunities for performance improvements for themselves or their suppliers, and in cases where conformance cannot immediately be demonstrated, we will support suppliers that are working on timely and reasonable progress towards conformance. If a supplier won’t work with us or change their practices to conform, 3M will seek alternative sources of supply.

    How Policy Conformance Benefits 3M Suppliers

    The business climate is continually changing and evolving. Not only are more customers interested in understanding where their products come from, but governments around the world, through laws and regulations, are requiring product producers to know more about the sources of their raw materials. Products that can be traced to responsible sources will help your business comply with regulations and protect your reputation, and can be a differentiation factor in retaining existing business and earning opportunities for new business.

    Together, we can support sustainable forestry and responsible, transparent supply chains.

    Additional Guidance

    United Nations Supply Chain Sustainability
    A Guide to Traceability: A Practical Approach to Advance Sustainability in Global Supply Chains


    **********

    Legal Harvesting Laws

    Products and product packaging supplied to 3M Company must comply with laws related to product content, including laws that prohibit use of illegally harvested timber or plant materials. Laws regarding timber and timber products, such as the United States Lacey Act, the European Union Timber Regulation, and the Australia Illegal Logging Prohibition Act, restrict the sales and imports of illegally harvested timber or products derived from such timber (including paper or paper pulp). These laws also may include "due care" or "due diligence" requirements.

    Additional Details on U.S. Lacey Act Requirements

    The U.S. Lacey Act was amended in 2008 to prohibit the purchase or sale of products or product packaging in the United States made from wood, paper, wood fiber or other plant materials, with certain limited exceptions, if the plant material was illegally harvested in its country of origin. The Lacey Act has import declaration requirements that are currently in effect for a limited number of wood products. However, the prohibition on purchase or sale of products containing illegally harvested plant materials applies to all products containing plant material.

    3M has developed a corporate U.S. Lacey Act Specification. The Specification has additional background on this law, and sets out 3M's expectations for suppliers providing materials to 3M that contain plant material subject to the Lacey Act. See U.S. Lacey Act Specification.

    3M's Sourcing Contract Provisions and Supply Chain Policies on Legal Harvesting

    3M includes prohibitions on illegally harvested plant materials in new and renewed sourcing contracts. Under 3M's Supplier Responsibility Code and previously 3M's Supply Chain Policies: EHS, Transportation, Labor/Human Resources and Supplied Materials, suppliers are expected to supply 3M materials containing plant materials or their derivatives that are legally sourced, harvested and exported from their country of origin. Suppliers are also expected to adopt policies and management systems with respect to the United States Lacey Act, the European Union Timber Regulation and similar laws (such as the Australia Illegal Logging Prohibition Act), and to require their suppliers to adopt similar policies and systems.

    As a supplier to 3M, please become aware of these requirements and take the following steps:


    1. Determine which of the products you supply to 3M contain timber or plant materials within the scope of the U.S. Lacey Act, the EU Timber Regulation, Australia Illegal Logging Act and similar laws.
    2. Work with your suppliers to make sure all plant materials are legally harvested, sourced and exported from their country of origin, or validate the origin as recycled.
    3. Adopt company policies and management systems with respect to the U.S. Lacey Act, EU Timber Regulation, Australia Illegal Logging Act and similar laws, and require your suppliers to adopt similar policies and systems. This will assist in pushing these requirements upstream and in obtaining information on legality of harvest that is passed downstream.

    Click here for more information on the U.S. Lacey Act: USDA Animal and Plant Health Inspection Service.

    Click here for more information on the EU Timber Regulation.

    Click here for more information on the Australia Illegal Logging Prohibition Act.

  • Background. Armed groups operating in the eastern Democratic Republic of the Congo (DRC) have controlled many of the region’s mines or transit routes and have engaged in armed conflict, as well as some of the world's worst human rights violations. Concern that proceeds from the mining of minerals have been used to fund extreme violence in that region led to a requirement in the U.S. Dodd-Frank Financial Reform Law of 2010, that U.S. publicly-traded companies must disclose any "conflict minerals" necessary to the functionality or production of products they manufacture or contract to manufacture. The conflict minerals are tin, tungsten, tantalum and gold (called the 3TG's). Companies using conflict minerals must also disclose their supply chain inquiries to verify whether these minerals originated in the DRC or adjoining countries.

    On August 22, 2012, the SEC approved the final rule on conflict minerals. All public companies must evaluate their product lines to determine whether they contain necessary conflict minerals and if so, file a Form SD by May 31 annually beginning in 2014, for products they manufacture or contract to manufacture in the year 2013. While the burden of compliance is on the public companies who manufacture those products, members of their supply chains for those products are also impacted.

    See More...
  • California's Rigid Plastic Packaging Container (RPPC) law was enacted in 1991 as part of an effort to reduce the amount of plastic waste disposed in California landfills and to increase the use of recycled postconsumer plastic. The law mandates that product manufacturers that sell products held in RPPCs meet one of the compliance options identified in the regulation.

    3M is committed to compliance with all laws, including those relating to Rigid Plastic Packaging Container (RPPC). RPPC generally means a packaging container that:

    • is made entirely of plastic (except for incidental portions of the packaging),
    • has a relatively inflexible shape or form,
    • has a minimum capacity or volume of eight (8) ounces up to a maximum capacity or volume of five (5) gallons,
    • is capable of at least one closure (including closure during the manufacturing process).

    RPPCs can range in shape, color, size, and form. RPPCs can include, but are not limited to:

    • Buckets
    • Tubs
    • Pails
    • Tubes
    • Cartridges
    • Jugs
    • Bottles (wide mouth and/or narrow neck)
    • Clamshells (heat-sealed and/or reclosable)
    • Plastic Folding Cartons

    RPPC legislation requires Packaging component suppliers to provide Certificates of Compliance with California law as required by Title 14 of the California Code of Regulations. We are requesting that as a supplier to 3M you provide all Container Manufacturer Certification Information as required under Section 17945.4 of Title 14, California Code of Regulations (CCR) for the package component numbers provided.

    We are sure that your company, like 3M, is committed to compliance with all applicable laws.

    For additional information regarding RPPC Packaging Legislation, see links below:

    California's Department of Resources Recycling and Recovery (CalRecycle)

    Regulations: Title 14, California Code of Regulations (CCR) Chapter 4, Article 3,

    Section 17942-17949

    Statutes: California Public Resources Code (PRC)

    Section 42300-42301

    Section 42310-42310.3

    Section 42320-42327

    Section 42330

    Section 42340-42345

  • 3M Company has developed a corporate EU RoHS Specification which sets forth 3M's expectations for suppliers providing materials to 3M that may be subject to the requirements of Annex II of the European Union Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment, as amended by Commission Delegated Directive (EU) 2015/863, known as "EU RoHS."

    Under EU RoHS, electrical and electronic equipment placed on the European Union market may not contain more than certain levels of:

    • Lead
    • Mercury
    • Cadmium
    • Hexavalent Chromium
    • Polybrominated biphenyls (PBBs) (flame retardant)
    • Polybrominated diphenyl ethers (PBDEs) (flame retardant)
    • Bis(2-ethylhexyl) phthalate (DEHP)*
    • Butyl benzyl phthalate (BBP)*
    • Dibutyl phthalate (DBP)*
    • Diisobutyl phthalate (DIBP)*

    Other countries around the world are considering and/or have implemented regulations that are similar to EU RoHS.

    The 3M EU RoHS Specification applies to all materials, parts, components and/or products (whether finished or semi-finished) that include restrictions on the EU RoHS substances listed above or that have this specification cited on or in their 3M part number drawing, part or product specifications, sourcing agreements, purchase contracts, purchase orders or other purchasing documentation.

    Here is the PDF Document3M Corporate EU RoHS Specification (32 KB)

    (*) – Restriction of final products placed on the EU market containing these substances does not enter into force for EEE Category 1-7, 10 & 11 until July 22, 2019 and until July 22, 2021 for Category 8 & 9 products. However, to allow time for parts/products to permeate through the supply chain which must meet these timelines when they are to be placed on the EU market, 3M still expects suppliers to meet this specification.

    For more information on the EU RoHS Directive, please see the following link: http://ec.europa.eu/environment/waste/rohs_eee/index_en.htm

  • This Code and all of its requirements applies to all 3M suppliers and Conformance to this Code is required to become or remain a supplier to 3M, anywhere in the world, and for any supplied material or service.

  • PDF Document Effective 11-04-21 (35K)

  • 3M is committed to respect for human rights in our own operations, in any business that works on our behalf, and in our supply chain. Our global Human Rights Policy applies to all 3M employees, contingent workers, anyone doing business with or on behalf of 3M, and candidates for hire at 3M. In addition, 3M expects its suppliers to be in full compliance with all applicable labor and human resource laws, committed to upholding the human rights of workers, and treating them with dignity and respect as understood by the international community and as stated in our Supplier Responsibility Code.

    In 2014, 3M became a signatory member of the United Nations Global Compact (UNGC), thereby committing to align our operations and strategies with the UNGC principles on human rights. Our global Human Rights Policy contains our prohibition on human trafficking. We are committed to using effective systems and controls to prevent human trafficking from taking place anywhere within our business or supply chains. The prohibitions apply to 3M and its subsidiaries, our federal contracts and subcontracts for either commercial or non-commercial items, and all of 3M’s global suppliers.

    The California Transparency in Supply Chains Act of 2010 (SB 657) and the UK Modern Slavery Act 2015 require certain businesses to produce a statement setting out the steps they have taken to ensure there is no modern slavery in their own business and their supply chains. Recent disclosure statements 3M has issued can be found below.

    2024 3M Modern Slavery Statement

    2023 3M Modern Slavery Statement

    2022 3M Modern Slavery Statement

    2021 3M Modern Slavery Statement

    2020 3M Modern Slavery Statement (covers 2019 reporting year since we changed title from reporting to published year)

    2018 UK Modern Slavery Statement

    2017 UK Modern Slavery Statement

    2016 UK Modern Slavery Statement

  • The U.S. Government contract clauses found on this site apply to 3M Orders, Contracts or Agreements with suppliers and subcontractors if, and only if, 3M Orders, Contracts or Agreements incorporate them by reference. More than one set of clauses may be incorporated into 3M Orders, Contracts or Agreements.

    U.S. Government Contracts - Provisions for Suppliers and Subcontractors
    USGOV-U:

    PDF Document Effective 10-11-24 (290K)
    PDF Document Effective 12-10-21 (358K)
    PDF Document Effective 11-11-21 (309K)
    PDF Document Effective 05-24-21 (307K)
    PDF Document Effective 01-11-21 (910K)
    PDF Document Effective 08-13-20 (308K)
    PDF Document Effective 04-10-20 (304K)
    PDF Document Effective 06-11-19 (159K)
    PDF Document Effective 07-03-18 (147K)
    PDF Document Effective 01-30-18 (134K)
    PDF Document Effective 04-20-17 (204K)
    PDF Document Effective 03-24-17 (479K)
    PDF Document Effective 12-17-14 (147K)
    PDF Document Effective 11-12-14 (122K)
    PDF Document Effective 03-24-14 (16K)
    PDF Document Effective 03-14-13 (15K)
    PDF Document Effective 02-01-13 (15K)
    PDF Document Effective 07-31-12 (15K)
    PDF Document Effective 04-26-12 (18K)
    PDF Document Effective 10-18-11 (20K)

    U.S. Government Contracts - Additional Provisions for Subcontractors
    USGOV-A:

    Effective 03-24-2017 US GOV-A no longer applicable. See US GOV U.

    PDF Document Effective 12-17-14 (165K)
    PDF Document Effective 09-08-14 (173K)
    PDF Document Effective 05-19-14 (17K)
    PDF Document Effective 02-25-14 (17K)
    PDF Document Effective 12-23-13 (17K)
    PDF Document Effective 03-14-13 (17K)
    PDF Document Effective 12-04-12 (17K)